Znet-9 LED Hydroponic Lights

Znet series-9 400W Grow LED light introduction- Medical Plants drawings to color
After long time of devoted working, we develop our new generation of grow LED light Znet series. With revelutionary heat sink solution, and independent lighting moldule, Znet is very easy to install and the repair. Also, for excellent heat sink instructure, can easy lead out more heat, so the current can go to more than 600mA for single device.
Overall view
Znet-9 includes four units of module, each module is independent, in single module, 20 units of different color device be arranged with standard order. In order to maxium the lighting effectiveness, in one module, lens angle is different to meet color's requirement.
Module assembly
On the PCB broad, two 2.54 standard connection port installed at the edge of all connection is easy to connect no glue.
Lens
In order to increase lighting effiency, Znet use second lens to increase the lux Theoritically, the purpose of using different wavelength is to meet the plant's growth requirement as more as possible. Such as voilet is to kill the bartrial; Red is to help flowering itec. Hence, some device need to strength lumen, some device need more coverage, Znet get balance between device function and need of plant.
All angle is same, rarely meet the requirement of different color. According to requirement of different device use different angles.
Device
Znet select top level LED device as light source, which addresses photosynthetic aspects, so that help plant growth finally. Meanwhile, all the device and the wavelength ratio can be cusomized to advance the growth of the plant.

Lumen and LUX
In the range of coverage, Znet Lux changing extent is lighter than D120W grow LED light, that means plant in the coverage accept almost same energy
Notice
1 Indoor use only, can not in water enviroment, no crash, no punch.
2 Daisy chain is available, international port for plug is at the back of the case
3 Lighting fail, contact Greensun service center, no allow to open the case without authorization.
4 No provide customer service if remove label
5 Lighting fail, if need repair manual, contact Green Sun service center.
ZNET series grow LED made with several integrate module, with 20PCS device soldered together, power from 200watt to 600watt is available.
Here is the pictures for you to better know this fixture.
1. There is 2 switches to control half of the light, thus you can turn off part of them to save energy.
2. Daisy chain for usage. You can daisy chain these fixtures together and thus only need one power cord to light these fixtures on.
3. Integrate module design, 3mins to install and unstall. If one module fail working, you just need remove this module, and the others are woking perfectly.
4. Very good light spreading. Eah color mix very well and plants love it very much